Set Up And Take Down

Trailer Specifications

Shelter Specifications

Floor Plans

Interoperability Packages

Set Up And Take Down

Easy to Set Up and Take Down, Perfect for Extreme Outdoor and Winter Camping

Set up and take down of the Reeves ICP shelter is easy and requires no special tools or handling of loose parts. To view a complete video of the set up and take down procedure, Click Here.

Shelter Set Up Procedure

1. Remove ICP from storage compartment in trailer.	2. Place shelter in center of area aft of trailer. Remove from bag.

3. Position shelter so that hubs are in line with trailer. Lift upwards at hubs and step back in unison.	4. Continue to lift, step back and spread. Maximum spread is complete when shelter begins to rise at center.

5. Locate red flags at flat ends. Reach under to locate push point hub with red flag. Place hand under hub and in unison pull up until pole is underneath and supporting shelter.	6. On command, with one person per flat end, lift shelter upwards with push poles until side walls come to a vertical position and shelter is self-supporting.

7. Velcro down flat end cover fabric on all four corners.	8. After repositioning shelter with one end ready to attach to trailer, install shelter floor.

9. Connect shelter to trailer using trailer boot.	10. Stake down the shelter.

Shelter Take Down Procedure

1. Remove stakes and tie back wind lines.	2. Remove trailer boot and back shelter off trailer.

3. Remove floor.	4. Unattach flat end corners on all sides.

5. Locate lifting hubs and in one swift motion lift shelter up and out to strike.	6. Walk toward each other until shelter is closed. Wrap straps around shelter.

7. Lay shelter on its side on top of the floor and roll. Compress as you roll.	8. Cinch with belt and bag and place back in storage compartment.